Introduction 
If we glance over a few decades, we observed that the world moves to use lightweight and reliable products. In this race, plastic made objects made the job easy.
Keeping Plastic material we think, is plastic weld-able? If yes, then how to plastic welding? Which mechanism should use to join plastic welding?
Plastic welding is introduced a few decades earlier from now. It is the process of joining plastic material by applying heat, pressure, and cooling.
Due to the heating and application of anxiety over the surface, experts categorized this welding method process.
Tools
We need an electric welding gun, thermoplastic electrode, and holding clips to maintain the positions to perform this welding.
Principle
Plastic welding is the easiest method to adopt at home for joining plastic products.
It is also considering a reliable process over non-welding procedures.
Here, we mentioned a few essential points that may help you while performing this;
- Clean the edges of the broken Plastic product.
- Use two supportive clumps to hold the positions and to exert pressure over the surface.
- Heat the edges by using a welding gun. The temperature varies due to variations in the composition of products. Some require high temperatures and some melts at low temperatures.
- When these edges are heated, join them slightly by using a nozzle of the welding gun.
- Use thermoplastic electrode (quality varies according to the chemical composition of material).
- Insert the electrode at the nozzle and plug in the welding gun. This nozzle will heat both the material and the electrode.
- Apply the melted electrode over the crack and allow them to cool.
- Until cooling, provide enough pressure to the material for joining.
Use proper protective measures to perform this process. Wear a mask that inhabitants the intake of discharged harmful fumes. According to researchers, thermoplastic fumes may hazardous for human health. Use gloves to ensure hand protection. Check the electric connection and follow the precautions.
Conclusion
This procedure guide you to know how to plastic welding. The plastic welding made everything easy regarding fix plastic material. Some people think the joining of plastic is a non-welding technique. As we studied, we got that electrode uses in joining, and heating and fusion technique as brief earlier. The non-welding methods do not use any additional electrode or welding agent for completing the task. This method is widely applied to repair the chairs and is also operating in the rooftop ceiling.
